If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How to remove Salomon SNS Profil binding?
I have a set of skis with the Salomon SNS Profil manual bindings on
them. Skate model. What's a good way to remove them? I see what looks like a plug at the rear of the heel plate but they're not easily removed. I can keep trying. I've removed the rubber bumpers. The plastic "S" snap-cover in the front-center of the binding, over the front-center screw, doesn't seem to want to come off. Do I just work a screwdriver under the front edge somehow? How do I expose the 2 side-screws? I don't see how to release the "bail" so that it can flip out of the way. Help? Links? Thanks, JP |
Ads |
#2
|
|||
|
|||
How to remove Salomon SNS Profil binding?
On Feb 9, 4:07*pm, jeff potter wrote:
I have a set of skis with the Salomon SNS Profil manual bindings on them. Skate model. What's a good way to remove them? I see what looks like a plug at the rear of the heel plate but they're not easily removed. I can keep trying. I've removed the rubber bumpers. The plastic "S" snap-cover in the front-center of the binding, over the front-center screw, doesn't seem to want to come off. Do I just work a screwdriver under the front edge somehow? How do I expose the 2 side-screws? I don't see how to release the "bail" so that it can flip out of the way. Help? Links? Thanks, JP Jeff, I've removed tons of these bindings. It really doesn't take rocket science. Most of the time I can get my Swiss Army knife to remove the plug in the back. Hold it vertically and run it around the plug as you work it up. I have also used a real small drill bit and drilled a hole in it and they ride up the drill bit. The S cap in the front comes up really easy with the edge of my Swiss Army knife. Get the blade under it and pry up. Than I take my knife and work it from the back of the binding plate to the front. Be careful on this move with the knife. Just get the knife under the plate and work free the glue tape. Don't pry up but move the knife along. This works every time. Hard to beleive you've never taken one of these off after all the knowlege and experience you have. |
#3
|
|||
|
|||
How to remove Salomon SNS Profil binding?
Snap off the plastic thing, and you will see the main screw.
Note that Solmon screws are not phillips, even though they look like a regular cross, and they are made of hardenned steal. Cheapo screwdriviers almost definitely will get stripped (if your ski shop mounted the bindgins faithfully). I would get a badass screwdriver, or better yet, get a specialized Salomon screwdriver |
#4
|
|||
|
|||
How to remove Salomon SNS Profil binding?
wrote in message ... Snap off the plastic thing, and you will see the main screw. Note that Solmon screws are not phillips, even though they look like a regular cross, and they are made of hardenned steal. Cheapo screwdriviers almost definitely will get stripped (if your ski shop mounted the bindgins faithfully). I would get a badass screwdriver, or better yet, get a specialized Salomon screwdriver I believe that's a pozi-drive screw head you're referring to;...maybe a #3...if the screws are sealed with epoxy, warming them will soften the epoxy's bond. |
#5
|
|||
|
|||
How to remove Salomon SNS Profil binding?
Where do you find a posidrive? I looked around a few months ago and
failed. Gene "ED3" wrote: wrote in message ... Snap off the plastic thing, and you will see the main screw. Note that Solmon screws are not phillips, even though they look like a regular cross, and they are made of hardenned steal. Cheapo screwdriviers almost definitely will get stripped (if your ski shop mounted the bindgins faithfully). I would get a badass screwdriver, or better yet, get a specialized Salomon screwdriver I believe that's a pozi-drive screw head you're referring to;...maybe a #3...if the screws are sealed with epoxy, warming them will soften the epoxy's bond. |
#6
|
|||
|
|||
How to remove Salomon SNS Profil binding?
On Feb 9, 6:56*pm, wrote:
Where do you find a posidrive? *I looked around a few months ago and failed. Gene "ED3" wrote: wrote in message .... Snap off the plastic thing, and you will see the main screw. Note that Solmon screws are not phillips, even though they look like a regular cross, and they are made of hardenned steal. Cheapo screwdriviers almost definitely will get stripped (if your ski shop mounted the bindgins faithfully). I would get a badass screwdriver, or better yet, get a specialized Salomon screwdriver I believe that's a pozi-drive screw head you're referring to;...maybe a #3...if the screws are sealed with epoxy, warming them will soften the epoxy's bond. Tornar Toolworks: http://www.tognar.com |
#7
|
|||
|
|||
How to remove Salomon SNS Profil binding?
On Feb 9, 7:14*pm, wrote:
On Feb 9, 6:56*pm, wrote: Where do you find a posidrive? *I looked around a few months ago and failed. Gene "ED3" wrote: wrote in message .... Snap off the plastic thing, and you will see the main screw. Note that Solmon screws are not phillips, even though they look like a regular cross, and they are made of hardenned steal. Cheapo screwdriviers almost definitely will get stripped (if your ski shop mounted the bindgins faithfully). I would get a badass screwdriver, or better yet, get a specialized Salomon screwdriver I believe that's a pozi-drive screw head you're referring to;...maybe a #3...if the screws are sealed with epoxy, warming them will soften the epoxy's bond. Tornar Toolworks: * *http://www.tognar.com I meant Tognar |
#8
|
|||
|
|||
How to remove Salomon SNS Profil binding?
|
#9
|
|||
|
|||
How to remove Salomon SNS Profil binding?
Lot easier to find when spelled pozidrive. For example,
http://www.sears.com/shc/s/OrderItem...:InitiateLogon and http://www.wihatools.com/300seri/313serie.htm#Extra Long PoziDriv John Forrest Tomlinson wrote: On Mon, 9 Feb 2009 18:56:35 -0700, wrote: Where do you find a posidrive? I looked around a few months ago and failed. Alpine ski shops often sell them. And a few other places -- here's an example http://www.reliableracing.com/catego...S (POSIDRIVER) |
#10
|
|||
|
|||
How to remove Salomon SNS Profil binding?
Maybe not Homer's depot, but a good hardware store, or tool supply house
will at least have bits; a good addition to one's wax box. I don't recall seeing a binding screw that wasn't driven by a #3 pozidrive/posidrive. ED3 wrote in message ... Lot easier to find when spelled pozidrive. For example, http://www.sears.com/shc/s/OrderItem...:InitiateLogon and http://www.wihatools.com/300seri/313serie.htm#Extra Long PoziDriv John Forrest Tomlinson wrote: On Mon, 9 Feb 2009 18:56:35 -0700, wrote: Where do you find a posidrive? I looked around a few months ago and failed. Alpine ski shops often sell them. And a few other places -- here's an example http://www.reliableracing.com/catego...S (POSIDRIVER) |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
replacing rubber plug for Solomon Profil binding | mike | Nordic Skiing | 6 | December 25th 07 12:29 PM |
Using Salomon Pilot 2 Classic Boots With Older Profil Classic Binding. | ADK Skier | Nordic Skiing | 7 | November 8th 06 08:45 PM |
HELP: Profil binding dias-assembly | Tony Curran | Nordic Skiing | 5 | November 29th 05 12:39 AM |
a profil binding question pls. | [email protected] | Nordic Skiing | 0 | November 14th 05 06:55 PM |
removing rear fastener on sns profil binding | Chris Crawford | Nordic Skiing | 3 | February 26th 05 12:29 AM |